If pressure gauge วัด แรง ดัน น้ำ is searching for a level sensor, you can be quickly overwhelmed by the large choice. An even sensor for limit level detection or continuous measurement could be ordered in a number of technologies and design variants. But how do you find the right level sensor for my application?
If one wants to decide on a level sensor, the most crucial selection criterion may be the electrical output function. If one wants to monitor a limit in a tank, e.g. dry running (empty) or overfilled (full), then the level sensor should actually be a level switch. However, if it’s vital that you monitor the contents of a tank at length (e.g. 0 ? 100 % fill level), then one needs continuous measurement (= level sensor).
The distinction between level sensor and level switch automatically leads to the exclusion of many technologies, if one wants the most economical solution. Although an even sensor with combined electronics can communicate both an analogue signal and switching signals, a pure level switch is always the cheaper solution, if the application form is limit level measurement only.
The selection of the best option measurement technology
Continuous measurement with float
Level sensors typically feature continuous analogue output signals, such as for example 4 ? 20 mA or 0 ? 10 V, which permit the accurate measurement of level and its variation. The sensors can be based on various measurement technologies such as for example magnetostriction, reed-chain technology, hydrostatic, ultrasound, radar and many more ? the choice of which varies from manufacturer to manufacturer.
Point measurement with optoelectronic level switch
Level switches in a traditional float switch design offer a mechanical switch contact or, in electronic version, generally a PNP or NPN transistor output. In neuro-scientific switches, there are also a number of measurement technologies such as for example reed contact technology, optoelectronics, conductivity, vibronic and many more.
Each one of these technologies has advantages and disadvantages, and complex, application-specific limiting factors such as conductivity, dielectricity, density, contamination, colour, pressure strength, etc. A trusted statement as to which technology is most suitable or can be utilized in a particular application environment can only just be produced after thorough assessment and often also your final test in the plant itself under real application parameters.
Note
WIKA offers you a very wide range of level measuring instruments. More info on optoelectronic level switches, hydrostatic level sensors, float switches and further instruments can be found on the WIKA website. You can find videos on the functionality of the average person measuring principles on our YouTube channel. Your contact person will undoubtedly be pleased to advise you on the selection of the most likely product solution.