FCI offers flow swap to protect from dry operating

Fluid Components International’s dual alarm FLT93 Series move change supplies an early warning alert to the potential of dry operating situations, cavitation and different pump points that can lead to emergency shutdowns and expensive maintenance.
The FLT93 Series circulate change reliably screens the flow and temperature of liquids, gases, and slurries. – Image: Fluid Components International

FCI’s FLT93 Series flow change reliably monitors the move and temperature of liquids, gases, and slurries. It is designed for pump wet/dry detection, the place sudden, surprising reductions in media move charges can leave pumps weak to over-heating situations that shutdown course of strains and require troubleshooting and fixing. The SIL2 rated instrument is intended for heavy-duty, probably hazardous process trade environments and comes with a complete listing of worldwide security approvals.
It has a no shifting components design and presents a strong scheme for pump safety with its twin alarm functionality. With Alarm 1, the swap detects a low circulate state of affairs wherever between 0.01 and 3 ft per second FPS (0.003–0.9 m per second MPS). This low circulate alarm is a pre-warning signal for the control system or operator who can then resolve to keep the pump working or to close it down.
If เกจวัดแรงดันคือ occurs because the feed line to the pump is running dry, this would be an emergency sign to shut down the pump instantly as a end result of the bearings now see gas instead of a liquid as a heat switch media. In such situations, the temperature of the bearings could rise very fast. Using a circulate switch prevents permanent injury to the pump’s bearings.
Share

Leave a Comment