The term ?dissipation loss? are available in the info sheet for a pressure sensor or pressure transmitter. One needs this specification in order to be in a position to protect the pressure sensor from overheating.
In case a pressure sensor is operated in a hot environment, it can be necessary to limit its electrical energy. If one neglects this aspect, one possibly risks an overheating sufficient reason for this, in the worst case, a complete failure of the instrument. Just how can the correct electrical connection be managed?
Determination of the correct electrical connection on the basis of the dissipation loss
First, the utmost permissible electrical energy for the pressure sensor must be known. This is given in the info sheet because the dissipation loss. Please be aware that the dissipation loss can be dependent upon the maximum expected operating temperature of the instrument and must be calculated where necessary.
If the allowable dissipation loss has been determined correctly, then your actual maximum electrical power for the pressure sensor that occurs could be determined. Dreadful can be carried out expediently in two steps:
1. Determination of the voltage at the pressure transmitter utilizing the following formula:
UPressure transmitter = UVoltage source ? RLoad � Imax. Current supply
2. Calculation of the maximum electrical energy for the pressure transmitter through the next equation:
PPressure transmitter = UPressure transmitter � Imax. Current supply
The maximum electrical power for the pressure transmitter (PPressure transmitter), that is now known, must be smaller than the permissible dissipation loss. If this is actually the case, both the power (UVoltage source) and the strain (RLoad) were properly calculated and the electrical energy of the pressure sensor will undoubtedly be within the permissible range under all operating conditions. Consequently, the pressure transmitter won’t heat too strongly and will withstand the mandatory operating temperatures.
Note
In the event you need any advice, your contact will gladly help you.